Demolition Guide 4 min read

Flooring Demolition & Removal in Broward County: Complete Guide

Professional Flooring Demolition & Removal

Removing old flooring is labor-intensive and generates significant debris. Professional flooring demolition ensures proper removal, subfloor preparation, and efficient debris demolition.

Types of Flooring We Remove

  • Hardwood flooring: Solid and engineered wood
  • Laminate flooring: Click-lock and glued installations
  • Vinyl flooring: Sheet vinyl and luxury vinyl plank (LVP)
  • Tile flooring: Ceramic, porcelain, and natural stone
  • Carpet: Residential and commercial carpet removal
  • Underlayment: Padding, subfloor prep, and moisture barriers

Flooring Removal Pricing

Pricing varies by flooring type and room size:

  • Hardwood removal: $1-3 per sq ft (recyclable)
  • Tile removal: $2-4 per sq ft (labor-intensive)
  • Laminate removal: $0.75-2 per sq ft
  • Vinyl removal: $0.50-1.50 per sq ft
  • Carpet removal: $0.50-1 per sq ft

Flooring Demo Examples

  • Plantation home (1,200 sq ft hardwood): $1,800 removal + disposal
  • Coral Springs kitchen (150 sq ft tile): $450
  • Tamarac condo (800 sq ft laminate): $900

Why Professional Flooring Demo?

  • Protects subfloors from damage
  • Efficient debris removal and recycling
  • Prepares surface for new flooring installation
  • Saves time and labor costs

Our Flooring Removal Process

Different flooring needs different tools and techniques. Here is how we handle each type:

Hardwood. Boards get pried up section by section. We watch for hidden nails and staples so the subfloor stays intact. Solid hardwood is heavy, so it gets hauled out in manageable loads.

Tile and stone. This is the dusty one. We use rotary hammers and floor scrapers, with dust barriers up and the work zone sealed off from the rest of the house.

Laminate and vinyl plank. Click-lock flooring pops up relatively fast. Glued-down products take longer because the adhesive has to be scraped.

Sheet vinyl. Cut into strips, pulled up, then the remaining adhesive gets scraped so the subfloor is ready for whatever comes next.

Carpet. Cut into strips, rolled, and carried out. Tack strips and staples get pulled so nobody steps on them later.

After removal, we inspect the subfloor and flag any soft spots, moisture damage, or uneven areas before your installer arrives.

Why Subfloor Condition Matters

New flooring is only as good as what sits underneath it. We see it all the time: beautiful new floors installed over a subfloor with water damage or high spots, and within a year there are problems. During removal we check for moisture staining, soft or spongy areas, and unevenness, and we tell you what we find. Fixing subfloor issues before the new floor goes down is far cheaper than fixing them after.

How to Prepare for Flooring Demo Day

  • Move furniture out of the rooms. Everything needs to leave the demo area. If you cannot move heavy pieces yourself, tell us during the walkthrough and we can discuss options.
  • Clear closets and pantries. Flooring runs under closet doors too. Empty them so the crew can work wall to wall.
  • Talk baseboards. We can remove baseboards carefully for reuse or tear them out if you are replacing them. Decide before demo day.
  • Protect what stays. We put down floor protection in hallways and hang dust barriers, but moving valuables and electronics away from the work zone is smart.

Common Flooring Demo Mistakes to Avoid

  • Installing new flooring over a bad subfloor. The most expensive mistake on this list. Get the subfloor checked during demo, not after the new floor is down.
  • DIY tile demo without dust control. Tile dust gets into every room of the house through the HVAC if you do not seal the work zone. We barrier every job.
  • Leaving old adhesive behind. New flooring needs a clean, flat surface. Skipping adhesive removal causes bonding failures and uneven floors.
  • Underestimating the debris. Tile and hardwood are heavy. A few rooms of tile can weigh thousands of pounds. We bring the trailer and the crew to handle it in one trip.

Flooring Demolition FAQ

How long does flooring removal take?
Most single rooms take a few hours. Whole-home flooring removal usually takes one to two days depending on the material and square footage.

Will you remove the baseboards?
Yes, if that is part of your scope. We can pull them carefully for reuse or remove and dispose of them if you are installing new ones.

What about old 9x9 floor tile?
Tile from older homes can contain asbestos. If we suspect it, we stop and recommend certified testing before proceeding. Safety first, always.

Do you recycle old hardwood?
When hardwood is in reusable condition, we separate it for recycling or reuse instead of sending it to the landfill.

Flooring Demo in Condos and High-Rises

A huge share of flooring work in Broward County happens in condos, and high-rise demo has its own rulebook. Most buildings restrict noisy work to weekday daytime hours, require elevator reservations for debris removal, and want hallway and elevator protection in place. Many also require sound underlayment for replacement flooring, which is your installer's department, but worth knowing before you pick materials. We coordinate with building management on timing and paperwork, and we schedule debris runs around elevator availability so the job does not stall waiting for a freight car.

Get Your Flooring Demo Quote

Call (954) 257-9831 for a free flooring demolition estimate. We'll assess your project and provide upfront pricing.